PENERAPAN TEKNOLOGI RFID DALAM IDENTIFIKASI BARANG BERBASIS INTERNET OF THINGS
DOI:
https://doi.org/10.69714/h4vmww36Keywords:
RFID, Internet of Things, NodeMCU ESP8266, UID, Google Sheets, RFID RC522, I2C LCDAbstract
The inventory recording process in the tool store of a mechanical engineering workshop is still done manually, making it prone to errors, delays, and difficulties in inventory management, especially when there are a large number of items or similar tools. This research aims to develop an RFID-based item identification system connected to the Internet of Things (IoT) to improve data collection efficiency and accuracy. The system uses an RFID RC522 to read the UID of the RFID card installed on each item, with a NodeMCU ESP8266 as the microcontroller. The UID and reading time are displayed on an I2C LCD and automatically sent to Google Sheets via an internet connection. Test results show the system is capable of reading and sending data with a success rate of up to 90%, while 10% of failures occur due to network connection disruptions. Thus, the system proves effective in automating the inventory recording process and minimizing human error.
References
A. Choerudin, J. Windarta, and S. Sumardi, “Perancangan sistem informasi peminjaman alat dan peralatan laboratorium berbasis RFID,” J. Telecommun., Electron., Control Eng. (JTECE), vol. 3, no. 1, pp. 41–47, 2021, doi: 10.20895/jtece.v3i1.251.
F. A. Deswar and R. Pradana, “Monitoring suhu pada ruang server menggunakan Wemos D1 R1 berbasis Internet of Things (IoT),” Teknol. dan Jaringan Informasi, vol. 12, no. 1, pp. 25–32, 2021, doi: 10.31602/tji.v12i1.4178.
N. H. L. Dewi, M. F. Rohmah, and S. Zahara, “Prototype smart home dengan modul NodeMCU ESP8266 berbasis Internet of Things (IoT),” Teknol. Informasi, pp. 3–3, 2019, doi: 10.56127/juit.v1i2.169.
F. Fitriyadi and H. Hariono, “Perancangan sistem absensi perkuliahan dengan menggunakan Radio Frequency Identification (studi kasus pada: STMIK Banjarbaru),” J. Ilm. Komput., vol. 17, no. 1, pp. 55–66, 2021, doi: 10.35889/progresif.v17i1.573.
A. Z. Hasibuan, H. Harahap, and Z. Sarumaha, “Penerapan teknologi RFID untuk pengendalian ruang kelas berbasis mikrokontroler,” Jutikomp, vol. 1, no. April, pp. 71–76, 2018, doi: 10.34012/jutikomp.v1i1.326.
M. Junus, T. S. Patma, A. Setiawan, A. A. Kusuma, and I. Mahfudi, “Analysis of the influence of the barrier against a range of active and passive RFID and its performance,” MATEC Web Conf., vol. 197, pp. 4–10, 2018, doi: 10.1051/matecconf/201819711014.
N. I. Luthfiah, “Optimasi pelayanan perpustakaan menggunakan teknologi RFID di UPT Perpustakaan ITB,” J. Multidisipliner Kapalamada, vol. 2, no. 4, pp. 240–252, 2023, doi: 10.62668/kapalamada.v2i04.837.
D. Okiandri and S. Syarifuddin, “Rancang bangun sistem kontrol Arduino pada gerbang otomatis menggunakan RFID,” G-Tech, vol. 4, no. 2, 2021, doi: 10.33379/gtech.v4i2.643.
R. Susanto and A. D. Andriana, “Perbandingan model waterfall dan prototyping untuk pengembangan sistem informasi,” Maj. Ilm. UNIKOM, vol. 14, no. 1, 2016.
