PENGUJIAN KADAR AIR DAN KUAT TARIK BAMBU GORONTALO
DOI:
https://doi.org/10.69714/33ymzz29Keywords:
Moisture Content, Tensile Strength, Gorontalo BambooAbstract
This study aims to examine the moisture content and tensile strength of Gorontalo bamboo as an alternative construction material that is environmentally friendly and economical. Bamboo samples were taken from the end part with moisture content testing using an oven and tensile strength testing using a tensile strength machine. The results showed the moisture content of Gorontalo bamboo and the tensile strength value that can be a reference in the utilization of bamboo as a building structure material. This research is expected to provide scientific information that is beneficial for the development of bamboo as a sustainable construction material.
References
A. P. Yani, “Keanekaragaman Dan Populasi Bambu Di Desa Talang Pauh Bengkulu Tengah,” J. Exacta, vol. 10, no. 1, hal. 61–70, 2012, [Daring]. Tersedia pada: http://repository.unib.ac.id/494/1/08. Isi vol x 2012 - Ariefa Primair Yani 061-070.pdf
E. Widjaja, Identikit Jenis-jenis Bambu di Kepulauan Sunda Kecil. Indonesia: Pusat Penelitian dan Bogor, Pengembangan Biologi-LIPI Balai Penelitian Botani, Herbarium Bogoriense Bogor, 2001.
N. Berlian dan E. Rayahu, Jenis dan prospek bisnis bambu. Indonesia: Jakarta Penebar Swadaya, 1995.
W. Liese, Bamboos: Biology, Silvics, Properties, Utilization. Eschborn. Rossdorf by TZ-Verlagsgesellschaft, 1985. [Daring]. Tersedia pada: https://lib.ugent.be/catalog/rug01:000293162
M. Wakchaure dan S. Kute, “Effect of Moisture Content on Physical and Mechanical Properties of Bamboo,” Asian J. Civ. Eng., 2012, [Daring]. Tersedia pada: https://www.researchgate.net/publication/285632439_Effect_of_moisture_content_on_physical_and_mechanical_properties_of_bamboo
F. T. Wulandari, “Karateristik Sifat Fisika Bambu Tali ( Gigantolochloa Apus Kurz ),” vol. 3, no. 1, hal. 69–77, 2020.
F. T. Wulandari, “Deskripsi Sebaran Jenis Dan Sifat Fisika Bambu Di Kawasan Hutan Dengan Tujuan Khusus (Khdtk) Senaru,” J. Hutan Trop., vol. 9, no. 1, hal. 1, 2021, doi: 10.20527/jht.v9i1.10463.
S. Handayani, “Pengujian Sifat Mekanik Bambu (Metode Pengawetan dengan Boraks),” J. Tek. Sipil dan Perenc., vol. 9, no. 1, hal. 43–53, 2007.
Morisco, Rekayasa Bambu. Yogyakarta: Nafiri Offset, 1999.
I. K. Sudarsana, D. Putra, dan I. G. A. P. W. Puryandhari, “Kuat Lekat Tulangan Bambu Petung Dan Bambu Tali Dalam Beton Normal,” J. Ilm. Tek. Sipil, vol. 24, no. 1, hal. 46–53, 2020, [Daring]. Tersedia pada: https://ojs.unud.ac.id/index.php/jits/article/download/58690/34154
F. X. Ndale, “Sifat Fisik Dan Mekanik Bambu Sebagai Bahan Konstruksi,” TEKNOSIAR - J. Tek. Univ. Flores, vol. 7, no. 2, hal. 22–31, 2013.
N. K. A. Artiningsih, “Pemanfaatan bambu pada konstruksi bangunan berdampak positif bagi lingkungan,” Metana, vol. 8, no. 1, hal. 1–9, 2012.
A. N. Latifah, K. Kurdiansyah, dan W. T. Istikowati, “PENGUKURAN KADAR AIR JENIS BAMBU BETUNG (Dindrocalamos asper), BAMBU KUNING (Bambusa vulgaris Schard) dan BAMBU SULUK (Gigantochloa levis Merr),” J. Sylva Sci., vol. 4, no. 5, hal. 897, 2021, doi: 10.20527/jss.v4i5.4212.
