TECHNICAL AND MANAGERIAL DETERMINANTS OF THREE-PHASE INDUCTION MOTOR EFFICIENCY: A CROSS-INDUSTRY COMPARATIVE LITERATURE STUDY
DOI:
https://doi.org/10.69714/nea7py86Keywords:
electrical energy efficiency, three-phase induction motor, efficiency influencing factors, textile industryAbstract
This study aims to examine the efficiency of three-phase induction motors and the factors influencing it through a literature study approach with a descriptive-analytical design. Secondary data were obtained from reputable journals, books, technical standards (IEC 60034-30-1, IEC 60085, PUIL 2011), government regulations, and industrial research reports. The analysis was conducted comparatively against findings from the palm oil, paper, and manufacturing sectors to identify similarities, differences, and key factors for improving efficiency. The results indicate that motor efficiency is affected by workload, operating temperature, voltage stability, motor age, the implementation of Occupational Health and Safety (OHS), and compliance with technical standards. Operating at near-optimal loads, performing routine maintenance, using Variable Speed Drives (VSD), and IoT-based monitoring have been proven to enhance efficiency and extend motor lifespan. The application of OHS measures and adherence to international/national standards maintain system reliability and reduce energy losses. This study recommends integrating technical and managerial strategies, including selecting high-efficiency class motors, optimizing load settings, implementing real-time monitoring, and providing technical training, to achieve efficient, safe, and sustainable motor performance while supporting industrial competitiveness amidst the demands for energy efficiency and environmental sustainability
References
“IEA,” Energy Effic. 2022, 2022.
Z. Zhang et al., “Municipal solid waste management challenges in developing regions: A comprehensive review and future perspectives for Asia and Africa,” Sci. Total Environ., vol. 930, no. February, p. 172794, 2024, doi: 10.1016/j.scitotenv.2024.172794.
K. Hasan, “Unlocking Employee Potential; Crafting an Effective Human Resource Strategy to Increase Teachers’ Motivation,” J. Res. Educ. Manag., vol. 2, no. 1, pp. 49–59, 2023.
“IEC 60034-30-1: Rotating electrical machines-Efficiency classes (IE-code),” 2014.
J. Vásquez, S. Aguirre, E. Puertas, G. Bruno, P. C. Priarone, and L. Settineri, “A sustainability maturity model for micro, small and medium-sized enterprises (MSMEs) based on a data analytics evaluation approach,” J. Clean. Prod., vol. 311, no. August 2020, 2021, doi: 10.1016/j.jclepro.2021.127692.
I. Withouck, P. Tett, J. Doran, B. Mouat, and R. Shucksmith, “Diving into a just transition: How are fisheries considered during the emergence of renewable energy production in Scottish waters?,” Energy Res. Soc. Sci., vol. 101, no. May, p. 103135, 2023, doi: 10.1016/j.erss.2023.103135.
D. H. Siswanto, Samsinar, A. Setiawan, N. Wahyuni, and P. W. Prasetyo, “Enhancement of Students’ Writing Skills Through Training in Scientific Article Writing,” Indones. J. Soc. Dev., vol. 3, no. 2, pp. 63–74, 2024, doi: 10.55927/ijsd.v3i2.8044.
Tarso, Y. D. Saputra, and D. H. Siswanto, “The impact of instagram social media utilization on sales revenue of MSMEs products in the digital era,” J. Manag. Stud. Dev., vol. 4, no. 01, pp. 63–74, 2025, doi: 10.56741/jmsd.v4i01.797.
“ISO 50001:2018-Energy management systems,” 2018.
“U.S. DOE Advanced Manufacturing Office,” Improv. Mot. Drive Syst. Perform., 2014.
“NEMA MG-1: Motors and Generators,” 2016.
“UNIDO,” Mot. Syst. Effic. Effic. Guid. Ind., 2011.
E. K. Alghiffari, S. R. Alam, and D. H. Siswanto, “Tren Publikasi Terkait Model Pengembangan 4D pada Pendidikan,” J. Pendidik. Transform., vol. 03, no. 05, pp. 1–10, 2024, doi: 10.9000/jpt.v3i5.2021.
Tarso, H. U. Kasanah, E. Purwanto, D. H. Siswanto, and N. R. Khasanah, “An empirical study on teacher performance: The effects of commitment, professionalism, and school principal Supervision in Sleman Regency,” JUPERAN J. Penedidikan dan Pembelajaran, vol. 04, no. 02, pp. 750–759, 2025.
K. Szum and J. Nazarko, “Exploring the Determinants of Industry 4.0 Development Using an Extended SWOT Analysis: A Regional Study,” Energies, vol. 13, pp. 1–27, 2020, doi: doi:10.3390/en13225972.
“IEEE Std 112-2017: Standard Test Procedure for Polyphase Induction Motors and Generators,” 2017.
B. H. Bahgat, E. A. Elhay, T. Sutikno, and M. M. Elkholy, “Revolutionizing motor maintenance: a comprehensive survey of state-of-the-art fault detection in three-phase induction motors,” Int. J. Power Electron. Drive Syst., vol. 15, no. 3, pp. 1968–1989, 2024, doi: 10.11591/ijpeds.v15.i3.pp1968-1989.
N. Trie, P. Sari, and A. Kusumawati, “Asian Journal of Management Entrepreneurship and Social Sciene Literature review : The efforts to strengthening of micro, small and medium-sized enterprises (MSME) in Indonesia,” Asian J. Manag. …, vol. 2, no. 01, pp. 98–115, 2022.
Tolulope O Olorunsogo, Jane Osareme Ogugua, Muridzo Muonde, Chinedu Paschal Maduka, and Olufunke Omotayo, “Environmental factors in public health: A review of global challenges and solutions,” World J. Adv. Res. Rev., vol. 21, no. 1, pp. 1453–1466, 2024.
“Bureau of Energy Efficiency (BEE) India,” Energy Effic. Text. Sect., 2015.
N. Naufal, F. Apriani, Fajriana, Nurdin, K. Nurdin, and D. H. Siswanto, Analisis Multivariat. Padang: Literasi Langsung Terbit, 2025.
F. Saleh et al., Kurikulum dan Pengembangan Kurikulum. Padang: Literasi Langsung Terbit, 2025.
B. H. Bahgat, E. A. Elhay, and M. M. Elkholy, “Advanced fault detection technique of three phase induction motor: comprehensive review,” Discov. Electron., vol. 1, no. 9, pp. 1–25, 2024, doi: 10.1007/s44291-024-00012-3.
S. Chirantan and B. B. Pati, “a Three Phase Induction Motor Dynamic Framework Regulated By Predictive and Intelligent Optimizations,” J. Eng. Technol. Ind. Appl., vol. 11, no. 51, pp. 43–55, 2025, doi: 10.5935/jetia.v11i51.1402.
C. T. P. Nguyen, B. H. Nguyễn, M. C. Ta, and J. P. F. Trovão, “Dual-Motor Dual-Source High Performance EV: A Comprehensive Review,” Energies, vol. 16, no. 20, pp. 1–28, 2023, doi: 10.3390/en16207048.
E. M. Szumska, “Regenerative Braking Systems in Electric Vehicles: A Comprehensive Review of Design, Control Strategies, and Efficiency Challenges,” Energies, vol. 18, no. 10, pp. 1–22, 2025, doi: 10.3390/en18102422.
Tarso, D. H. Siswanto, and A. Setiawan, “Teacher qualifications in the implementation of the Kurikulum Merdeka and ISMUBA,” Curricula J. Curric. Dev., vol. 4, no. 1, pp. 13–28, 2025, doi: 10.17509/curricula.v5i1.76836.
M. Azab, “A Review of Recent Trends in High-Efficiency Induction Motor Drives,” Vehicles, vol. 7, no. 1, pp. 1–50, 2025, doi: 10.3390/vehicles7010015.
P. Dinolova, V. Ruseva, and O. Dinolov, “Energy Efficiency of Induction Motor Drives: State of the Art, Analysis and Recommendations,” Energies, vol. 16, no. 20, pp. 1–26, 2023, doi: 10.3390/en16207136.
D. H. Siswanto, H. A. Putri, K. Kintoko, and S. Suwajirah, “Chemistry laboratory management: Reviewing planning, organization, and evaluation for effectiveness,” Curricula J. Curric. Dev., vol. 4, no. 1, pp. 229–242, 2025, doi: 10.17509/curricula.v4i1.80139.
R. Mala, P. Surya, and D. H. Soswanto, “Managing Character Education for Students with Special Needs: A Framework of Planning, Organizing, Implementation and Evaluation,” ITQAN J. Ilmu-ilmu Kependidikan, vol. 16, no. 1, pp. 65–76, 2025.
M. Buheji, H. Jahrami, and A. Sabah Dhahi, “Minimising Stress Exposure During Pandemics Similar to COVID-19,” Int. J. Psychol. Behav. Sci., vol. 10, no. 1, pp. 9–16, 2020, doi: 10.5923/j.ijpbs.20201001.02.
W. D. Astutik, V. K. Sadiyah, and D. H. Siswanto, “Counseling on clean and healthy living behavior in improving public health levels,” J. Soc. Community Dev., vol. 2, no. 01, pp. 38–50, 2025, doi: 10.56741/jscd.v2i01.889.
C. T. H. Tran, H. T. M. Tran, H. T. N. Nguyen, D. N. Mach, H. S. P. Phan, and B. G. Mujtaba, “Stress Management in the Modern Workplace and the Role of Human Resource Professionals,” Bus. Ethics Leadersh., vol. 4, no. 2, pp. 26–40, 2020, doi: 10.21272/bel.4(2).26-40.2020.
D. H. Siswanto and M. M. Afandi, “Analysis of the implementation of mindfulness in Senior High School students’ learning,” Asian Pendidik., vol. 4, no. 1, pp. 79–85, 2024, doi: 10.53797/aspen.v4i1.9.2024.
A. S. Harahap, M. Y. Rambe, K. Sadiyah, T. N. Pulungan, and D. H. Siswanto, “Developing Financial Literacy and Investment Awareness to Promote Healthy Financial Behavior among High School Students,” J. Pengabdi. Masy. Bestari, vol. 4, no. 6, pp. 459–468, 2025, doi: 10.55927/jpmb.v4i6.180.
N. S. Khumalo, N. P. Memane, and U. B. Akuru, “Performance and Safety Improvement of Induction Motors based on Testing and Evaluation Standards,” CES Trans. Electr. Mach. Syst., vol. 8, no. 3, pp. 310–318, 2024, doi: 10.30941/CESTEMS.2024.00018.
C. Nevoloso et al., “On the Inadequacy of IEC 60034-2-3 and IEC 60034-30-2 Standards for Power Losses, Efficiency and Energy Class Evaluation in PWM Multilevel Inverter-Driven PMSM,” IEEE Open J. Ind. Electron. Soc., vol. 6, no. March, pp. 962–981, 2025, doi: 10.1109/OJIES.2025.3574857.
M. Digalovski, G. Rafajlovski, and K. Najdenkoski, “Energy efficiency improvements in electric drives with centrifugal load,” E+E, vol. 57, pp. 9–12, 2022.
N. A. Udroiu and C. G. Nicolae, “Possibilities to reduce CO2 emissions by using electric motors with high energy efficiency,” Sci. Pap. D-Animal Sci., vol. 65, no. 1, pp. 428–435, 2022.
M. Digo, U. Situmeang, and E. Zondra, “Analisis Kinerja Motor Induksi 3 Phasa Pada Screw Press Pabrik Kelapa Sawit di PT. Guna Agung Semesta,” J. Sain, Energi, Teknol. Ind., vol. 6, no. 2, pp. 66–72, 2022, doi: 10.31849/sainetin.v6i2.9676.
D. Novianto, E. Zondra, and H. Yuvendius, “Analisis Efisiensi Motor Induksi Tiga Phasa Sebagai Penggerak Vacuum Di PT. Pindo Deli Perawang,” SainETIn J. Sains …, vol. 4, no. 2, pp. 73–80, 2022, doi: 10.31849/sainetin.v6i2.9734.
L. Sartika, A. M. Prasetia, and I. E. N. Nicholas, “Analisa Pengaruh Perubahan Beban Terhadap Kinerja Motor Induksi 3 Fasa Scraper Conveyordi Pt. Citra Siwit Lestari,” J. Elektro dan Telekomun. Terap., vol. 10, no. 1, p. 7, 2023, doi: 10.25124/jett.v10i1.5999.
