Analisis Biaya Relevan dan Opportunity Cost dalam Keputusan Make Or Buy PT Astra Otoparts Tbk

Authors

  • Davibel Efod Mongan Universitas Negeri Surabaya Author
  • Atika Putri Fatharani Universitas Negeri Surabaya Author
  • Ineza Alodia Universitas Negeri Surabaya Author
  • Risky Budianto Universitas Negeri Surabaya Author

DOI:

https://doi.org/10.69714/k1saf036

Keywords:

Relevant Costs, Differential Costs, Opportunity Costs, Make or Buy

Abstract

The make-or-buy decision requires a company to compare the costs of producing a component internally with the costs of purchasing it from an outside supplier. PT Astra Otoparts Tbk carries out both activities, so this study compares the two alternatives using the company’s consolidated financial statements for 2021–2025. The analysis covers raw materials, labor, and manufacturing overhead, while depreciation is excluded because it is assumed not to change between the alternatives. The results show that the estimated relevant cost of internal production was higher than the recorded purchase cost in each year. The difference ranged from Rp4,837,666 million in 2021 to Rp6,933,592 million in 2022, with a cumulative difference of Rp28,722,859 million. This amount is treated as an indication of possible savings from buying, not as realized savings or theoretical opportunity cost. The calculation is limited by the use of aggregate public data and does not include product-level comparisons or nonfinancial factors. Under the assumptions used, buying appears less costly, but the company still needs to consider supplier reliability, product quality, and the use of its internal production capacity.

References

S. A. Putri, S. W. Alexander, and N. Y. T. Gerungai, “Penerapan biaya relevan dalam pengambilan keputusan menerima pesanan khusus guna meningkatkan laba pada Usaha Berkah Cone Manado,” Jurnal EMBA: Jurnal Riset Ekonomi, Manajemen, Bisnis dan Akuntansi, vol. 10, no. 4, pp. 2166–2175, 2022, doi: 10.35794/emba.v10i4.44700.

A. Maharani and A. R. Agustin, “Analisis biaya relevan dalam pengambilan keputusan (memproduksi sendiri atau membeli dari luar) pada Old Bakery,” Jurnal Perilaku Bisnis Kontemporer, vol. 2, no. 3, pp. 155–162, 2025, doi: 10.62769/1mk1a327.

K. Kasmi and N. Affan, “Analisis differential cost dan opportunity cost dalam pengambilan keputusan membeli atau memproduksi sendiri bahan baku,” Kinerja: Jurnal Ekonomi dan Manajemen, vol. 21, no. 2, 2024, doi: 10.30872/jkin.v21i2.15201.

S. Wahyuliningtyas, N. R. Ratih, and M. Kusummaningarti, “Implementasi differential cost dan opportunity cost dalam pengambilan keputusan membuat sendiri atau membeli,” Jurnal Ilmiah Akuntansi dan Keuangan (JIAKu), vol. 2, no. 2, pp. 152–163, 2023, doi: 10.24034/jiaku.v2i2.5789.

A. M. Makarim and R. A. Sulbahri, “Analisis biaya diferensial dalam menentukan alternatif keputusan manajemen: Pendekatan systematic literature review,” Jurnal Ekonomi Manajemen dan Bisnis, vol. 3, no. 5, pp. 187–196, 2026, doi: 10.62017/jemb.v3i5.7405.

A. Chaturvedi, “Contracting with multiple suppliers: A multi-item buyer’s make versus buy decision,” Prod. Oper. Manag., vol. 32, no. 2, pp. 434–448, 2023, doi: 10.1111/poms.13880.

A. Friedrich, A. Lange, and R. Elbert, “Make-or-buy decisions for industrial additive manufacturing,” J. Bus. Logist., vol. 43, no. 4, pp. 623–653, 2022, doi: 10.1111/jbl.12302.

D. Longauer, T. Vasvári, and Z. Hauck, “Investigating make-or-buy decisions and the impact of learning-by-doing in the semiconductor industry,” Int. J. Prod. Res., vol. 62, no. 11, pp. 3835–3852, 2024, doi: 10.1080/00207543.2023.2250009.

G. O. Tampubolon, K. Samosir, D. Fransiska, and H. Siallagan, “Analisis penggunaan biaya diferensial dalam pengambilan keputusan manajerial,” EKOMA: Jurnal Ekonomi, Manajemen, Akuntansi, vol. 3, no. 6, pp. 2564–2573, 2024, doi: 10.56799/ekoma.v3i6.5374.

G. V. Pessak, S. W. Alexander, and R. J. Pusung, “Analisis biaya diferensial dan opportunity cost dalam pengambilan keputusan menjual atau memproses lebih lanjut pada PT. Fortuna Inti Alam,” Going Concern: Jurnal Riset Akuntansi, vol. 16, no. 3, pp. 279–286, 2021, doi: 10.32400/gc.16.3.36377.2021.

H. Setiawan et al., “Analisis biaya peluang (opportunity cost) dalam pengambilan keputusan produksi pada UMKM Pempek Syamil,” SAINTEK: Jurnal Ilmiah Sains dan Teknologi Industri, vol. 8, no. 2, pp. 1–5, 2024, doi: 10.32524/saintek.v8i2.1811.

I. Rumopa, V. Ilat, and I. Elim, “Penerapan biaya relevan dalam pengambilan keputusan membuat sendiri atau membeli ‘kaleng’ pada PT. Deho Bitung,” Going Concern: Jurnal Riset Akuntansi, vol. 11, no. 1, 2016, doi: 10.32400/gc.11.1.10561.2016.

PT Astra Otoparts Tbk, “Laporan keuangan konsolidasian tahunan 2021–2025.” Accessed: Oct. 1, 2026. [Online]. Available: https://www.astra-otoparts.com/investorrelation

PT Astra Otoparts Tbk, “Laporan tahunan 2025,” 2025. Accessed: Oct. 1, 2026. [Online]. Available: https://www.astra-otoparts.com/investorrelation

PT Astra Otoparts Tbk, “Products.” Accessed: Oct. 1, 2026. [Online]. Available: https://www.astra-otoparts.com/products

D. Longauer, Z. Hauck, and T. Vasvári, “Make-or-buy strategies in a multi-stage manufacturing process and the role of learning effect in relocation decisions,” Comput. Ind. Eng., vol. 180, Art. no. 109259, 2023, doi: 10.1016/j.cie.2023.109259.

Downloads

Published

14-11-2026

How to Cite

Analisis Biaya Relevan dan Opportunity Cost dalam Keputusan Make Or Buy PT Astra Otoparts Tbk (Davibel Efod Mongan, Atika Putri Fatharani, Ineza Alodia, & Risky Budianto, Trans.). (2026). Jurnal Ilmiah Manajemen Dan Akuntansi, 3(6), 45-56. https://doi.org/10.69714/k1saf036